Where Ingenuity Becomes Art
FOR ARCHITECTS, CONSULTANTS & SPECIFIERS
Access Jazeera Paints project specifications, coating systems and ready-to-use wording for project documentation.
View specifications online or download Word and PDF files for use in your project documentation.
Interior coating specification covering substrate preparation, primers, putties, topcoats, painting schedules and application requirements.
Exterior coating specification covering substrate preparation, primers, plain and textured finishes, and execution requirements.
Browse the specification by section and copy the wording you need directly into your project documents.
A. Painting materials complete with primers, sealers, fillers, stains and finish coats applied for interior areas as indicated on Drawings and as specified herein.
B. Anti-static painting suitable for electrical rooms, low current rooms and server rooms.
A. SASO – Saudi Arabian Standards Organization
SASO 321 Industrial safety and health regulations - Hazardous materials - Paints - Part 1: Spray finishing using flammable and combustible materials
SASO 470 Paint and varnishes.
SASO 471 Ready mixed oil-based paints for use on concrete and masonry.
SASO 472 Paints and varnishes – Gloss enamel (For interior and exterior surfaces)
SASO 473 Paints and varnishes.
SASO 474 Paints and varnishes – Examination and preparation of samples for testing.
SASO 475 Paints and varnishes – Determination of the effect of heat.
SASO 476 Paints and varnishes - Determination of the effect of heat
SASO 477 Paints and varnishes – Scratch test.
SASO 478 Paints and varnishes – Determination of resistance to water – Water immersion method.
SASO 592 Paints and varnishes - Surface-Drying test - Ballotini method
SASO 593 Paints and varnishes - Bend test - (Cylindrical mandrel)
SASO 780 Paints and varnishes - Determination of resistance to humidity (Continuous condensation).
SASO 1188 Methods of test for paints and varnishes: Determination of hard drying time.
SASO 810 Paints and varnishes - Sampling equipment.
SASO 861 Methods of test for paints and varnishes: Preparation of test panels before coating.
SASO 868 Methods of test for paints and varnishes: Determination of flash-point (Closed cup method).
SASO 817 Priming paints.
SASO 818 Alkyd based undercoating paints for general purposes.
SASO 943 Paints and varnishes - Methods of testing glass beads for road marking paints
B. ASTM - American Society for Testing and Materials
ASTM D 16 Standard Definitions of Terms Relating to Paint, Varnish, Lacquer, and Related Products
ASTM D 562 Consistency of Paints Using the Stromer Viscometer
ASTM D 2833 Standard Index of Methods for Testing Architectural Paints and Coatings
ASTM D 3276 Standard Guide for Painting Inspectors (Metal Substrates)
ASTM D 3927 Standard Guide for State and Institutional Purchasing of Plant
ASTM E 84 Surface Burning Characteristics of Building Material
A. Product Data: Submit manufacturers technical information including instructions for thinning, mixing,
curing and touch-up.
B. Manufacturer's standard color charts.
C. Test Reports and certificates of compliance.
D. Samples: Prior to beginning work, furnish color chips for surfaces to be painted. Submit samples for the Engineer review of color and finish. Provide a listing of material and application for each coat of each final sample.
1. On 300 mm x 300 mm hardboard, provide 2 samples of each color and material, with final finish to simulate actual conditions. Re-submit samples as requested by Engineer until acceptable sheen, color and finish is achieved.
2. On wood surfaces, provide 2 samples 100 x 200 mm of natural and stained wood finish on actual wood types. Label and identify each as to location and application.
3. On concrete masonry, provide two 100 mm square samples of masonry for each type of finish and color, defining filler, prime and finish coat.
4. On actual wall surfaces and other exterior and interior building components, duplicate painted finishes of prepared samples. Provide full-coat finish samples on at least 9 m² of surface, as direct, until required sheen, color and final finish is obtained; simulate finished lighting conditions for review of in-place work.
5. Final acceptance of colors will be from samples applied on the job.
A. Deliver materials to job site in manufacturer's original new and unopened packages and containers bearing manufacturer's name and label, and following information:
-Name or title of material.
-Manufacturer's stock number and date of manufacture.
-Manufacturer's name.
-Contents by volume, for major pigment and vehicle constituents.
-Thinning instructions.
-Application instructions.
-Color name and number.
B. Store materials not in actual use in tightly covered containers in a well-ventilated area and protect from moisture, direct sunlight and temperatures below 10oC and above limits recommended by the manufacturer. Maintain containers used in storage of paint in clean conditions, free of foreign materials and residue.
C. Keep storage area neat and orderly. Remove oily rags and waste daily. Take all precautions to ensure that workmen and work areas are adequately protected from fire hazards and health hazards resulting from handling, mixing and application of paints.
A. Single Source Responsibility: Provide sealers, fillers, stain, undercoats and finish coats produced by same manufacturer. Use only thinners approved by paint manufacturer, and use only within recommended limits.
B. Coordination of Work: Review other Sections of these Specifications in which prime paints are to be provided to ensure compatibility of total coatings system for various substrates. Upon request from other trades, furnish information or characteristics of finish materials provided for use, to ensure compatible prime coats are used.
C. Material Quality: Provide manufacturer's best quality trade sale paint material of various coating types specified. Paint material containers not displaying manufacturer's product identification will not be acceptable.
A. Do not apply paint in areas where excessive dust, dirt, or airborne contaminants may settle on wet surfaces. Maintain suitable environmental conditions during application and drying. Comply with the paint manufacturer's recommendations regarding application, ventilation, and drying temperatures.
B. Apply water-based paints only when the moisture content of substrate is not more than 12% and the temperature of surfaces to be painted and surrounding air temperatures are between 10°C and 32°C, unless otherwise permitted by paint manufacturer's printed instructions.
C. Apply solvent-thinned paints only when the moisture content of substrate is not more than 4% and the temperature of surfaces to be painted and surrounding air temperatures are between 7°C and 35°C, unless otherwise permitted by paint manufacturer's printed instructions.
D. Do not apply paint when relative humidity exceeds 85% or to damp or wet surfaces; unless otherwise permitted by paint manufacturer's printed instructions.
A. Material Quality
1. Provide premium-grade interior architectural paint and coating materials of the types specified, manufactured by an acceptable and established coating materials manufacturer. Products shall be specifically formulated and suitable for the intended substrate, exposure conditions, and service requirements.
2. Paints, primers, and coatings shall be supplied in the manufacturer's original, unopened, sealed containers, clearly identified with the manufacturer's name, product name, product identification, batch or lot number, and other applicable information.
3. Materials shall be standard products regularly manufactured and commercially available from the manufacturer. Materials that are unidentified, improperly labeled, expired, damaged, or not supplied in the manufacturer's original containers will not be acceptable.
4. Primer, intermediate, and finish coats shall be mutually compatible and, unless otherwise approved, shall be products manufactured by the same manufacturer and forming part of the manufacturer's recommended coating system.
B. Paint Systems
1. Refer to the Painting Schedule at the end of this Section for the specified interior paint and coating systems.
2. Provide complete coating systems, including surface preparation, primers, intermediate coats, and finish coats, in accordance with the Painting Schedule and the coating manufacturer's written recommendations.
3. Coating systems shall be suitable for interior architectural applications and shall provide appropriate resistance to normal interior conditions, including washing, wet cleaning, abrasion, scuffing, staining, and routine maintenance, as applicable to the specified area and finish.
4. Coating systems shall be selected according to the requirements of the specific interior area, including general occupied spaces, high-traffic areas, wet or humid areas, kitchens, service areas, and other areas subject to increased cleaning or moisture exposure, where applicable.
C. Paint Colors
1. Color: Match the Engineer's approved color samples.
2. Provide uniform color and appearance throughout each continuous painted surface. Final colors shall be subject to the Engineer's approval before commencement of finish-coat application.
3. Where different colors or finishes are specified, provide clean, straight, and sharply defined lines at junctions between adjacent colors and finishes.
4. Provide the specified sheen and finish consistently throughout each designated area. Touch-up materials shall match the approved finish in color, sheen, and appearance.
Technical Confirmation – Interior Painting
For the interior version, I recommend replacing your previous confirmation checklist with the following:
A. Examine substrates and conditions under which painting work is to be performed. Do not proceed with
painting until unsatisfactory conditions have been corrected.
B. Verify that surfaces are properly prepared, dry, clean, sound, and free from dust, dirt, grease, oil,
efflorescence, loose material, laitance, and other contaminants that may adversely affect coating
adhesion or performance.
C. Verify that moisture content and other substrate conditions are within the limits recommended by the
paint manufacturer for the specified coating system.
D. Verify compatibility of existing coatings, sealers, primers, and other materials with the specified coating
system before application.
E. Notify the Engineer of conditions that may adversely affect the appearance, adhesion, or performance
of the coating system. Do not commence painting until such conditions have been corrected.
A. Protect adjacent surfaces, finishes, fixtures, fittings, furniture, equipment, and other items from
damage, staining, or paint splatter.
B. Remove dirt, dust, grease, oil, wax, efflorescence, mildew, loose paint, and other contaminants from
surfaces to be painted using methods recommended by the coating manufacturer.
C. Fill cracks, holes, joints, depressions, and other surface imperfections with suitable fillers or patching
compounds compatible with the specified coating system.
| Cracks Treatment | |
| Filling Range | Jazeera Fillers |
| Up to 1 cm | JAZEERA CRACK FILLER / Two-components filler |
| up to 2 cm wide and 2 cm depth. | JAZEERA ULTIMATE / Light weight filler |
| 0.5–2 mm | JAZEERA EPOXY CRACK FILLER 400 / Two-component, solvent free filler, based on epoxy polyamide cured |
| up to 4 cm width and 8 cm depth | JAZEERA UNIQUE FILLER / Light weight, two components, solvent free epoxy filler |
| Cement Joint-treatment | JAZEERA UNIQUE JOINTS / Two component epoxy based light weight filler, specially formulated to seal joints between cement boards and concrete panels |
| Gypsum Joint treatment | JAZEERA GYPSONEAT / Water borne putty based on special type of emulsion and modifiers, specially used for leveling and smoothing both vertical and horizontal gypsum surfaces |
A. Apply paints and coatings in accordance with the manufacturer's written instructions and the
requirements of this Section.
B. Apply coatings by brush, roller, spray, or other approved method appropriate for the specified product,
substrate, and finish.
C. Apply each coat uniformly and evenly, free from runs, sags, drips, curtains, brush marks, roller marks,
excessive spray, or other defects.
D. Apply successive coats only after the preceding coat has adequately dried and cured in accordance
with the manufacturer's recommended recoat interval.
E. Apply sufficient coats to achieve the specified color, opacity, uniformity, and finish. Additional coats
shall be applied where necessary to obtain complete and uniform coverage.
F. Maintain uniform color, sheen, texture, and appearance throughout continuous surfaces. Avoid lap
marks and visible variations caused by application methods.
G. Maintain clean and sharply defined lines at corners, edges, junctions, openings, and interfaces
between different colors or finishes.
H. Do not thin paints or coatings except where specifically permitted by the manufacturer's written
instructions. Use only approved thinners and additives and within the manufacturer's recommended
limits.
I. Do not apply coatings when environmental or substrate conditions are outside the limits specified by the
manufacturer.
J. Provide adequate ventilation during application and drying of coatings, particularly when solvent-
containing products are used.
A. Inspect completed painted surfaces for uniformity of color, sheen, coverage, adhesion, and overall
appearance.
B. Correct defects including runs, sags, drips, pinholes, holidays, cracking, blistering, peeling, excessive
brush or roller marks, uneven sheen, and color variations.
C. Touch up damaged or defective areas using compatible materials and application methods that
produce a finish matching the surrounding surface.
D. Where touch-up cannot produce an acceptable uniform appearance, repaint the affected area or
complete surface as directed by the Engineer.
E. The Engineer may require additional coats where the specified coverage, color, opacity, or finish has
not been achieved.
A. Remove masking materials, protective coverings, paint splatters, drips, and other debris resulting from
the painting work.
B. Clean adjacent surfaces, fixtures, fittings, glass, floors, and other items affected by the painting
operations without damaging completed finishes.
C. Remove temporary protection after completion of painting and when approved by the Engineer.
D. Leave completed areas clean, orderly, and ready for occupancy.
A. Protect completed painted surfaces from damage, dust, dirt, moisture, and other contaminants until the
coatings have fully dried and cured.
B. Do not permit subsequent construction activities to damage or contaminate completed painted
surfaces.
C. Repair or replace damaged painted surfaces to the satisfaction of the Engineer using compatible
materials and approved application methods.
D. Maintain required environmental conditions during the drying and curing period in accordance with the
coating manufacturer's written recommendations.
Painting materials complete with primers, sealers, fillers, stains and finish coats applied for exterior and interior areas as indicated on Drawings and as specified herein.
A. SASO – Saudi Arabian Standards Organization
SASO 321 Industrial safety and health regulations - Hazardous materials - Paints - Part 1: Spray finishing using flammable and combustible materials
SASO 470 Paint and varnishes.
SASO 471 Ready mixed oil-based paints for use on concrete and masonry.
SASO 472 Paints and varnishes – Gloss enamel (For interior and exterior surfaces)
SASO 473 Paints and varnishes.
SASO 474 Paints and varnishes – Examination and preparation of samples for testing.
SASO 475 Paints and varnishes – Determination of the effect of heat.
SASO 476 Paints and varnishes - Determination of the effect of heat
SASO 477 Paints and varnishes – Scratch test.
SASO 478 Paints and varnishes – Determination of resistance to water – Water immersion method.
SASO 592 Paints and varnishes - Surface-Drying test - Ballotini method
SASO 593 Paints and varnishes - Bend test - (Cylindrical mandrel)
SASO 780 Paints and varnishes - Determination of resistance to humidity (Continuous condensation).
SASO 1188 Methods of test for paints and varnishes: Determination of hard drying time.
SASO 810 Paints and varnishes - Sampling equipment.
SASO 861 Methods of test for paints and varnishes: Preparation of test panels before coating.
SASO 868 Methods of test for paints and varnishes: Determination of flash-point (Closed cup method).
SASO 817 Priming paints.
B. ASTM - American Society for Testing and Materials
ASTM D 16 Standard Definitions of Terms Relating to Paint, Varnish, Lacquer, and Related Products
ASTM D 562 Consistency of Paints Using the Stromer Viscometer
ASTM D 2833 Standard Index of Methods for Testing Architectural Paints and Coatings
ASTM D 3276 Standard Guide for Painting Inspectors (Metal Substrates)
ASTM D 3927 Standard Guide for State and Institutional Purchasing of Plant
ASTM E 84 Surface Burning Characteristics of Building Material
A. Product Data: Submit manufacturers technical information including instructions for thinning, mixing,
curing and touch-up.
B. Manufacturer's standard color charts.
C. Test Reports and certificates of compliance.
D. Samples: Prior to beginning work, furnish color chips for surfaces to be painted. Submit samples for the Engineer review of color and finish. Provide a listing of material and application for each coat of each final sample.
1. On 300 mm x 300 mm hardboard, provide 2 samples of each color and material, with final finish to simulate actual conditions. Re-submit samples as requested by Engineer until acceptable sheen, color and finish is achieved.
2. On wood surfaces, provide 2 samples 100 x 200 mm of natural and stained wood finish on actual wood types. Label and identify each as to location and application.
3. On concrete masonry, provide two 100 mm square samples of masonry for each type of finish and color, defining filler, prime and finish coat.
4. On actual wall surfaces and other exterior and interior building components, duplicate painted finishes of prepared samples. Provide full-coat finish samples on at least 9 m² of surface, as direct, until required sheen, color and final finish is obtained; simulate finished lighting conditions for review of in-place work.
5. Final acceptance of colors will be from samples applied on the job.
A. Deliver materials to job site in manufacturer's original new and unopened packages and containers bearing manufacturer's name and label, and following information:
-Name or title of material.
-Manufacturer's stock number and date of manufacture.
-Manufacturer's name.
-Contents by volume, for major pigment and vehicle constituents.
-Thinning instructions.
-Application instructions.
-Color name and number.
B. Store materials not in actual use in tightly covered containers in a well-ventilated area and protect from moisture, direct sunlight and temperatures below 10oC and above limits recommended by the manufacturer. Maintain containers used in storage of paint in clean conditions, free of foreign materials and residue.
C. Keep storage area neat and orderly. Remove oily rags and waste daily. Take all precautions to ensure that workmen and work areas are adequately protected from fire hazards and health hazards resulting from handling, mixing and application of paints.
A. Single Source Responsibility: Provide sealers, fillers, stain, undercoats and finish coats produced by same manufacturer. Use only thinners approved by paint manufacturer, and use only within recommended limits.
B. Coordination of Work: Review other Sections of these Specifications in which prime paints are to be provided to ensure compatibility of total coatings system for various substrates. Upon request from other trades, furnish information or characteristics of finish materials provided for use, to ensure compatible prime coats are used.
C. Material Quality: Provide manufacturer's best quality trade sale paint material of various coating types specified. Paint material containers not displaying manufacturer's product identification will not be acceptable.
A. Do not paint when air is dust-laden or when weather and temperature conditions are unsuitable. Do not paint exterior surfaces in damp or rainy weather. Comply with manufacturer's recommendations with respect to application and drying period temperatures.
B. Apply water-based paints only when the moisture content of substrate is not more than 12% and the temperature of surfaces to be painted and surrounding air temperatures are between 10°C and 32°C, unless otherwise permitted by paint manufacturer's printed instructions.
C. Apply solvent-thinned paints only when the moisture content of substrate is not more than 4% and the temperature of surfaces to be painted and surrounding air temperatures are between 7°C and 35°C, unless otherwise permitted by paint manufacturer's printed instructions.
D. Do not apply paint when relative humidity exceeds 85% or to damp or wet surfaces; unless otherwise permitted by paint manufacturer's printed instructions.
A. Material Quality
1. Provide premium-grade exterior architectural paint and coating materials of the types specified, manufactured by an acceptable and established coating materials manufacturer. Products shall be specifically formulated and suitable for the intended substrate, exposure conditions, and service requirements.
2. Paints, primers, and coatings shall be supplied in the manufacturer's original, unopened, sealed containers, clearly identified with the manufacturer's name, product name, product identification, batch or lot number, and other applicable information.
3. Materials shall be standard products regularly manufactured and commercially available from the manufacturer. Materials that are unidentified, improperly labeled, expired, damaged, or not supplied in the manufacturer's original containers will not be acceptable.
4. Primer, intermediate, and finish coats shall be mutually compatible and, unless otherwise approved, shall be products manufactured by the same manufacturer and forming part of the manufacturer's recommended coating system.
B. Paint Systems
1. Refer to the Painting Schedule at the end of this Section for the specified exterior paint and coating systems.
2. Provide complete coating systems, including surface preparation, primers, intermediate coats, and finish coats, in accordance with the Painting Schedule and the coating manufacturer's written recommendations.
3. Coating systems shall be suitable for exterior architectural exposure and shall provide appropriate resistance to ultraviolet radiation, weathering, moisture, chalking, fading, blistering, peeling, and normal environmental conditions.
C. Paint Colors
1. Color: Match the Engineer's approved color samples.
2. Provide uniform color and appearance throughout each continuous painted surface. Final colors shall be subject to the Engineer's approval before commencement of finish-coat application.
3. Where different colors or finishes are specified, provide clean, straight, and sharply defined lines at junctions between adjacent colors and finishes.
For technical confirmation
Exterior Paint Schedule:
Documented system options include Jazeera Royal Prime, Jazeera Exterior Primer, Jazeera Tex Primer WB, Jazeera Extreme / Matrix EX where levelling is required, and approved Jazeera exterior topcoats selected according to project conditions.
A. Examine substrate and conditions under which painting will be performed. Proceed with the work only when conditions are satisfactory.
B. Do not paint over dirt, rust, scale, grease, moisture, scuffed surfaces, or conditions otherwise detrimental to formation of a durable paint film.
1. Remove hardware and accessories, machined surfaces, plates, lighting fixtures, and similar items in place and not to be finish-painted, or provide surface-applied protection prior to surface preparation and painting operations. Remove, if necessary, for complete painting of items and adjacent surfaces. Following completion of painting of each space or area, reinstall removed items.
2. Clean surfaces to be painted before applying paint or surface treatments. Remove oil and grease prior to mechanical cleaning. Program cleaning and painting so that contaminants from cleaning process will not fall onto wet, newly-painted surfaces.
3. Perform preparation and cleaning procedures in accordance with paint manufacturer's instructions and as herein specified, for each particular substrate condition.
4. Fill dents, cracks, hollow places, open joints, and other irregularities with a filler suitable for the purpose and, after setting sand to a smooth finish.
| Cracks Treatment | |
| Filling Range | Jazeera Fillers |
| Up to 1 cm | JAZEERA CRACK FILLER / Two-components filler |
| up to 2 cm wide and 2 cm depth. | JAZEERA ULTIMATE / Light weight filler |
| 0.5–2 mm | JAZEERA EPOXY CRACK FILLER 400 / Two-component, solvent free filler, based on epoxy polyamide cured |
| up to 4 cm width and 8 cm depth | JAZEERA UNIQUE FILLER / Light weight, two components, solvent free epoxy filler |
| Cement Joint-treatment | JAZEERA UNIQUE JOINTS / Two component epoxy based light weight filler, specially formulated to seal joints between cement boards and concrete panels |
A. Mix and prepare painting materials in accordance with manufacturer's directions.
B. Maintain containers used in mixing and application of paint in clean condition, free of foreign materials and residue.
C. Stir materials before application to produce mixture of uniform density, stir as required during application. Do not stir surface film into material. Remove film and, if necessary, strain material before using.
A. Apply paint in accordance with the manufacturer's directions. Use applicators and techniques best suited for the type of material being applied. Do not exceed manufacturers recommended coverage per gallon. Apply materials with care to a uniform and proper film thickness, showing no runs, holidays, sags, crawls, or other defects. Apply with a minimum of brush marks. Finish surfaces shall be uniform in sheen, color and texture and match approved samples.
B. Allow coats to dry thoroughly before succeeding coats are applied; allow a minimum of 24 hours between applications on any one surface unless otherwise specified by the paint materials manufacturer.
C. Sandpaper undercoats on interior metal thoroughly and uniformly to provide a smooth, even surface for finish coats.
D. Apply paint by brush, roller, spray, or other acceptable practice in accordance with the manufacturer's directions. Use brushes best suited for the type of material being applied. Use rollers of carpet, velvet back, or high-pile sheep wool as recommended by the paint manufacturer for material and required finish.
E. Brush-out and work all brush coats into the surfaces in an even film. Cloudiness, spotting, holidays, laps, brush marks, runs, sags, or other surface imperfections will not be acceptable. Neatly draw all primer or first coats, unless otherwise permitted to use mechanical applicators.
F. Except as otherwise specified, apply a prime coat to material that is required to be painted or finished.
G. Apply the first-coat material to surfaces that have been cleaned, pre-treated or otherwise prepared for painting as soon as practicable after preparation and before subsequent surface deterioration.
H. Number of coats and paint film thickness required is the same regardless of the application method. Sand between each enamel and varnish coat application with fine sandpaper or rub surfaces with pumice stone where required to produce an even, smooth surface in accordance with the paint manufacturer's directions.
I. Allow sufficient time between successive coatings to permit thorough drying. Do not re-coat until paint does not deform or feel sticky under moderate thumb pressure and the application of loss of adhesion of the undercoat.
J. Paint type, color, surface treatment shall be as scheduled. Provide finish coats that are compatible with prime paints used.
K. When undercoats, stains, or other conditions show through the final coat of paint, apply additional coats until the paint film is of uniform finish, color and appearance. Insure that all surfaces including edges, corners, crevices, welds, and exposed fasteners receive a film thickness equivalent to that of flat surfaces.
L. Paint surfaces behind movable equipment and furniture the same as similar exposed surfaces. Paint surfaces behind permanently fixed equipment or furniture with prime coat only. Exposed surfaces are defined as those areas visible when permanent or built-in fixtures, convector covers, covers for finned tube radiation, grilles and similar items are in place in areas scheduled to be painted.
M. Where visible through registers or grilles, paint interior surfaces of ducts and void spaces with a flat, non-specular black paint.
N. Paint the back sides of access panels and removable or hinged covers to match the exposed surfaces.
O. Finish exterior doors on tops, bottoms and side edges the same as the exterior faces, unless otherwise indicated.
P. Omit primer on metal surfaces that have been shop-primed and touch-up painted.
Q. Dry Film Thickness (DFT): Provide dry film thickness for each finish type, including prime and finish coats, not less than total dry film thickness as specified in painting schedule.
R. Stipple Enamel Finish: Roll and redistribute paint to an even and fine touch. Leave no evidence of rolling such as laps, irregularity in final finish, skid marks, or other surfaces imperfections.
S. Pigmented Finishes: Completely cover to provide an opaque, smooth surface of uniform finish, color, appearance and coverage. Cloudiness, spotting, holidays, laps, brush marks, runs, sags, or other surface imperfections will not be acceptable.
T. Transparent (Clear) Finishes: Use multiple coats to produce glass-smooth surface film of even luster. Provide a finish free of laps, cloudiness, color irregularity, runs, brush marks, orange peel, nail holes, or other surface imperfections. Provide satin finish for final coats, unless otherwise indicated.
U. Completed Work: Match approved samples for color, final finish and coverage. Remove, refinish or re-paint work not in compliance with specified requirements.
A. Clean-Up: 1. During progress of work, remove from site discarded paint materials, rubbish, cans and rags at end of each work day. 2. Upon completion of painting work, clean window glass and other paint-spattered surfaces. Remove spattered paint by proper methods of washing and scraping, using care not to scratch otherwise damage finished surfaces. B. Protection: 1. Protect work of other trades, whether to be painted or not, against damage by painting and finishing work. Correct any damage by cleaning, repairing or replacing, and re-painting, as acceptable by the Engineer. 2. Provide Wet Paint signs as required to protect newly-painted finishes. Remove temporary protective wrappings provided by others for protection of their work, after completion of painting operations. 3. At completion of work of other trades, touch-up and restore damaged and/or defaced surfaces.
PROJECT SUPPORT
Our technical team can help you select the appropriate coating system and specification approach for your project requirements.
