12-24 hours Recoat Time
28 Days Full Dry Time
Coverage: 1.5 m2 per KG
high resistance to efflorescence
Breathable Allow substrates to breath moistureUsed as waterproofing in:
• Drinking water tanks.
• Swimming pools.
• Bassins.
• Irrigation canals.
• Sea water and brackish water structures.
• Underground passages and basements.
• Foundation structures.
• Wet areas like kitchens and bathrooms.
• Always apply “Jazeera Hydrova” to pre-wetted substrates but free from excess water.
• Apply the first coat by brush, roller or spray at a minimum rate of 1.7 kg/ m².
• Apply “Jazeera Hydrova”with fiber galss mesh on corner, edges, drainage and supplying of the tank.
• Do not spread the material too thin and finish in one direction for neat appearance. If the mix begins to dry during application, do not add
water but re-dampen the surface .
• Apply second coat at the rate of 1.3 kg/m² when the first coat is fully dry and ready to receive the second one, in oppsite direction of the
first coat to ensure full substrate coverage, at least two coats should be applied at a final thickness of at least 2mm. .
• After application, especially in dry, hot or windy weather, it is recommended to protect the surface with sheets after application until full
drying to avoid rapid evaporation.
• “Jazeera Hydrova” will be ready to use after 28 days from end of application,Tanks should be flushed with water prior to filling.
• Brush.
• Roller.
• Spray machine.
For concrete and other masonry substrates , specially designed for drinking water tanks.
