To determine the amount of paint required, we divide the surface area by the coverage rate per liter and subsequently multiply the result by the number of coats needed.
Based on the product we will suggest the number of coats that you'll need.
We recommend this number of paint coats to ensure the best results.
7Days Full Dry Time
Coverage: 1.1 m2 per liter Recommended to use where solar reflectivity properties and exceptional waterproofing are required on horizontal and slope variety surfaces of steel, galvanised steel, concrete, cement tiles, polyurethane foam and butiminum surfaces, for roof of steel structures, warehouses, commercial buildings, residential buildings and service facilities.
• For steel and galvanized steel:
* Apply one coat of "Jazeera Cool Roof" thickness 75µ as a primer after thinning (10-15) % water using airless spray
* Install "Jazeera Titex T-325" by using "Jazeera Cool Roof" on steel sheets joint which in the path of drainge water.
* Apply 2 coats of "Jazeera Cool Roof " 500µ by airless spray.
• For cement tiles and concrete surfaces:
* Apply one coat of "Jazeera Cool Roof" thickness 75µ as a primer after thinning (10-15) % water using roller.
* Install "Jazeera Titex T-325" by using "Jazeera Cool Roof" on corners, cracks of concrete surfaces , pipes and drainage.
* Apply 1 coat of "Jazeera Cool Roof" 500µ by roller after that install "Jazeera Titex T-325" then Apply another coat of "Jazeera Cool Roof"
500µ by roller and continue for full area.
• For polyurethane foam and butiminum surfaces:
* Install fabric mish by using "Jazeera Cool Roof" on corners and big holes.
* Apply 2 coats of "Jazeera Cool Roof" 500µ by roller.
Airless spray:
Roller :
Brush:
