36hr Recoat Time
7Days Full Dry Time
Coverage: 1 m2 / Ltr
Excellent adhesion
Breathable Allow substrates to breath moisture
Excellent resistance to harsh weather conditions.For concrete surfaces:
• Apply one coat of "Jazeera Roof Protection" as a primer after thinning (30-40)% by using roller.
• Apply two coats of "Jazeera Roof Protection" 500μ by roller.
• For best results, "Jazeera Tietex Mish" can be used for reinforcing and also on corners, pipes and drainage.
For mozaic tiles surfaces:
• Apply one coat of "Jazeera Roof Protection" as a primer after thinning (30-40)% by using roller.
• Install "Jazeera Tietex Mish" by using "Jazeera Roof Protection" on corners, pipes and drainage.
• Apply one coat of "Jazeera Roof Protection" 500μ by roller after that install "Jazeera Tietex Mish" then apply another coat of "Jazeera Roof
Protection" 500μ by roller and continue for full area.
For steel surfaces:
• Apply one coat of "Jazeera Roof Protection" thickness 75μ as a primer after thinning (10-15)% by using airless spray.
• Install "Jazeera Tietex Mish" by using "Jazeera Roof Protection" on steel sheets joint which in the path of drainge water.
• Apply two coats of "Jazeera Roof Protection" 500μ by airless spray.
For polyurethane foam surfaces:
• Install "Jazeera Tietex Mish" by using "Jazeera Roof Protection" on corners and big holes.
• Apply two coats of "Jazeera Roof Protection" 500μ by roller.
• Airless spray: Nozzle Orifice : "0.017-0.021"
Nozzle Pressure : 15 MPa ( 2100psi)
Spray Angle : 40-60°
• Roller :(Recommended type: Dekor Nardeen 8009 - code:1093)
• Brush: Recommended type. for narrow areas
For cement Tiles:
• The surface must be clean, dry, free from dust, oil, grease, salt, mold and protrusions.
For concrete and masonry surfaces:
• The concrete must be fully cured for 28 days.
• The surface must be treated by removing all forms release agents and protrusions to get a suitable surface for application.
• Make sure that the surface is sound, clean, free from dust, oil, greases, salt and mold.
• Fill cracks and holes by “Jaz Epoxy Crack Filler ESP”.
For steel surfaces:
• The surface must be sound, clean, dry, free from corrosion, dust, oil, grease and salt.
• "Jazeera Epo-mastic" should be applied on the rusted areas after suitable preparation.
• All holes shall be filled by a suitable sealant.
For polyurethane foam surfaces:
• The surface must be clean, dry and free from dust, oil, grease, salt and mold.
