High build two component solvent free amine cured epoxy floor coating with self-smoothing and seamless properties for protection and decoration. It is high-gloss smooth finish without any joint traces, highly resistant to chemicals and abrasions as well as anti-flame spread properties.
Features
Easy to apply
Excellent resistance to water and chemicals
Excellent flame spread resistance
Excellent self-leveling
Product specification
Recommended use
Recommended to use where high wear, abrasion and chemical resistance also high cleaning properties are required. Ideal for variety surfaces such as concrete, cement, mortars and steel. It can be used on abroad range of interior flooring such as: aircraft hangers, factories, warehouses, car garages, parking, power stations, exhibition halls, showrooms, food industries and laboratories. If intended to be used in exterior, it should be overcoated by “Jazeera Florthane SB”.
Painting System
• For Concrete and Cement surfaces: -Primer: Apply one coat of “Jazeera Epoxy Sealer / Epoxy Sealer Clear / Epoxy Sealer 400” according to surface nature. -Topcoat: • Apply two coats of “Jazeera Floor Coating 400”. -Note: for exterior application apply two coats of “Jazeera Florthane SB” as a topcoat. • For slip resistance finish use Jazeera Aggregate as following: • Broadcasting method: - Broadcast “Jazeera Aggregate G10-G30-G40” on the primer by rate 0.5-1 kg/m² or 1st coat of “Jazeera Floor Coating 400” before drying. - After drying the excess aggrigate should be removed by vacuum cleaner or brush. - Apply one or two coats of “Jazeera Floor Coating 400” as required roughness. • Mixing Method: Mix “Jazeera Aggregate G10-G30” with “Jazeera Floor Coating 400” by rate 7.5-8 kg/drum 27.36 kg. - Apply one coat of the mixture. • Texture method: - Mix “Jazeera Filler F1” with “Jazeera Floor Coating 400” by rate 700 - 750 gram/drum 25.36kg. - Apply one coat of the mixture. - Make texture finish by using special sponge roller. •For Steel Surfaces: -Primer: Apply one coat of “Jazeera Epoxy Zinc Phosphate primer”. -Topcoat: Apply two coats of “Jazeera Floor Coating 400”. - Note: for exterior application apply two coats of “Jazeera Florthan SB” as a topcoat.
Application Tools
• Roller: short naps roller (3/8 inch) is suitable type for epoxy. • Brush: a stiff nylon brush.recommended for narrow areas.
High build two component solvent free amine cured epoxy floor coating with self-smoothing and seamless properties for protection and decoration. It is high-gloss smooth finish without any joint traces, highly resistant to chemicals and abrasions as well as anti-flame spread properties.
Features
Easy to apply
Excellent resistance to water and chemicals
Excellent flame spread resistance
Excellent self-leveling
Product specification
Recommended use
Recommended to use where high wear, abrasion and chemical resistance also high cleaning properties are required. Ideal for variety surfaces such as concrete, cement, mortars and steel. It can be used on abroad range of interior flooring such as: aircraft hangers, factories, warehouses, car garages, parking, power stations, exhibition halls, showrooms, food industries and laboratories. If intended to be used in exterior, it should be overcoated by “Jazeera Florthane SB”.
Painting System
• For Concrete and Cement surfaces: -Primer: Apply one coat of “Jazeera Epoxy Sealer / Epoxy Sealer Clear / Epoxy Sealer 400” according to surface nature. -Topcoat: • Apply two coats of “Jazeera Floor Coating 400”. -Note: for exterior application apply two coats of “Jazeera Florthane SB” as a topcoat. • For slip resistance finish use Jazeera Aggregate as following: • Broadcasting method: - Broadcast “Jazeera Aggregate G10-G30-G40” on the primer by rate 0.5-1 kg/m² or 1st coat of “Jazeera Floor Coating 400” before drying. - After drying the excess aggrigate should be removed by vacuum cleaner or brush. - Apply one or two coats of “Jazeera Floor Coating 400” as required roughness. • Mixing Method: Mix “Jazeera Aggregate G10-G30” with “Jazeera Floor Coating 400” by rate 7.5-8 kg/drum 27.36 kg. - Apply one coat of the mixture. • Texture method: - Mix “Jazeera Filler F1” with “Jazeera Floor Coating 400” by rate 700 - 750 gram/drum 25.36kg. - Apply one coat of the mixture. - Make texture finish by using special sponge roller. •For Steel Surfaces: -Primer: Apply one coat of “Jazeera Epoxy Zinc Phosphate primer”. -Topcoat: Apply two coats of “Jazeera Floor Coating 400”. - Note: for exterior application apply two coats of “Jazeera Florthan SB” as a topcoat.
Application Tools
• Roller: short naps roller (3/8 inch) is suitable type for epoxy. • Brush: a stiff nylon brush.recommended for narrow areas.
Sizes Available
FLOOR COATING 400 -WHITE | 23.530KGCOATING 400
Login
New User?Create an Account
Can't access your account?Reset Password
Create an Account
Already have an accountSign in
If you're an existing customer or registered online, kindly Reset Password
Can't access your account?Reset Password
Hooray!
You're all set after a successful registration!Welcome back, You're all set after a successful registration!
12hr Recoat Time
7Days Full Dry Time
Easy to apply
Excellent resistance to water and chemicals
Excellent flame spread resistance
Excellent self-leveling
