To determine the amount of paint required, we divide the surface area by the coverage rate per liter and subsequently multiply the result by the number of coats needed.
Based on the product we will suggest the number of coats that you'll need.
We recommend this number of paint coats to ensure the best results.
2hr Recoat Time
7Days Full Dry Time
Coverage: 3.6 m2 per kg For Concrete and Cement surfaces:
Primer:
• Apply one coat of “Jazeera Epoxy Sealer Clear” or “Jaz Epoxy Sealer Clear Ultra” for pourse substrates.
Topcoat:
• Apply two coats of “Jazeera Floor Coating”.
Note: for exterior application apply two coats of “Jazeera Florthane SB” as a topcoat.
For Steel Surfaces:
Primer:
• Apply one coat of “Jazeera Epoxy Zinc Phosphate primer” for anti-corressive properties.
Topcoat:
Apply two coats of “Jazeera Floor Coating”.
Note: for exterior application apply two coats of “Jazeera Florthane SB” as a topcoat.
For Slip Resistance Finish:
• Broadcast “Jaz Non-Slip Aggregate” on the primer “Jaz Epoxy Sealer Clear Ultra”or 1stcoat of “Jazeera Floor Coating” coat by rate 0.5-1
kg/m2 before drying.
• After drying the excess aggrigate should be removed by vacuum cleaner or brush.
• Apply one or two coats of “Jazeera Floor Coating” as required roughness.
• Roller: short naps roller (3/8 inch) is suitable type for epoxy.
• Brush: a stiff nylon brush.recommended for narrow areas.
• Squeegee: recommended to achieve a continuous coating.
• Trowel / notched trowel : can be use.
• Spike Roller should be used after achieving the film thickness for avoiding air bubbles.
