Can't access your account? Reset Password
If you're an existing customer or registered online, kindly Reset Password
Can't access your account? Reset Password
How to restore Wood Surfaces (Wood Elegance)
Spread the plastic sheeting on the floor to protect it from paint and dust, and secure it with masking tape so that it does not move while you work. Then sand and smooth the entire surface by using 400sandpaper as necessary for a smooth, consistent finish, then thoroughly clean off any sanding residue with a dry cloth.
Do not shake the can, just stir it a little before using it, then apply Jazeera Wood Elegance Stain by using a piece of cloth. We used the shade "we-007", you can choose your favorite color through the product page here.
Wait for it to dry for at least an hour at 25°C then Dilute the product with pure water.
Dilution ratio by volume Brush: (5-10%) Spray gun: (10-15%)
Apply the first coat of Jazeera Wood Elegance Sealer by using a brush then wait for it to dry for at least two hours at 25°C. We used the brush 2 inch, you can choose the size you need it through the product page here.
Sand and smooth the entire surface by using 400 sandpaper as necessary for a smooth, consistent finish, then thoroughly clean off any sanding residue with a dry cloth.
Apply a second coat of Jazeera Wood Elegance Sealer using the brush then Wait for it to dry for at least two hours at 25°C
Sand the entire surface using Sanding Paper 400, this is important so the paint adheres well to the surface smoothly then dilute the product with Pure water.
Dilution ratio by volume Brush: (5-10%) Spray gun: (10-15%)
Apply the first coat of Jazeera Wood Elegance Lacquer by using the brush then wait for dry for at least two hours at 25°C. We used the brush 2 inch, you can choose the size you need it through the product page here.
Apply the second coat of Jazeera Wood Elegance Lacquer by using a brush.