Jazeera Epo-Mortar NB" (normal build) is based on a high quality solvent free epoxy polyamine cured. An excellent concrete resurfacing material to provide high strength, outstanding impact, excellent chemical and abrasion resistance. The three pack product consist of a resin base, hardener and special silica aggregates supplied in pre-weighed quantities ready for use on-site mixing and use.
- High resistance to a wide range of chemicals.
- Excellent adhesion and durability.
- Excellent resistance to impact and abrasion.
- High resistance to alkalis and salt solutions.
- High impermeable to water.
- Excellent ultimate strength.
Product specification
Recommended use
Jazeera Epo-Mortar NB has been designed to be used for horizontal concrete as well as steel surfaces
Painting System
Place the mixed material onto the primed surface whilst the primer is still wet (Tacky), using a clean trowel or other suitable hand tool. Ensure
that the applied mortar is worked well into repair edges and any irregularities. A smooth surface finish may be achieved using steel float
moistened with solvent. Place "Jazeera Epo-Mortar NB" in layers approximately10 mm.
Note: "Jazeera Epo-Mortar NB"Can be overcoated by:"Jazeera Floor Coating” as following:
-Apply one coat of "Jazeera Floor Coating” mixed with "Jazeera Floor Filler” (5kg:1gallon).
Jazeera Epo-Mortar NB" (normal build) is based on a high quality solvent free epoxy polyamine cured. An excellent concrete resurfacing material to provide high strength, outstanding impact, excellent chemical and abrasion resistance. The three pack product consist of a resin base, hardener and special silica aggregates supplied in pre-weighed quantities ready for use on-site mixing and use.
- High resistance to a wide range of chemicals.
- Excellent adhesion and durability.
- Excellent resistance to impact and abrasion.
- High resistance to alkalis and salt solutions.
- High impermeable to water.
- Excellent ultimate strength.
Product specification
Recommended use
Jazeera Epo-Mortar NB has been designed to be used for horizontal concrete as well as steel surfaces
Painting System
Place the mixed material onto the primed surface whilst the primer is still wet (Tacky), using a clean trowel or other suitable hand tool. Ensure
that the applied mortar is worked well into repair edges and any irregularities. A smooth surface finish may be achieved using steel float
moistened with solvent. Place "Jazeera Epo-Mortar NB" in layers approximately10 mm.
Note: "Jazeera Epo-Mortar NB"Can be overcoated by:"Jazeera Floor Coating” as following:
-Apply one coat of "Jazeera Floor Coating” mixed with "Jazeera Floor Filler” (5kg:1gallon).
48hr Recoat Time
7Days Full Dry Time
Coverage: 0.1 m2 per Ltr
