Cracking is one of the most common wall problems and is usually seen in recently built or old buildings.
ULTIMATE
Lightweight filler, easy to apply based on an innovative emulsion. It is designed to fill cracks and small holes up to 2 cm depth of 2 cm width
shrinkage-free in a single shot
Level the surface with the crack edges using sanding paper 220.
Step 2
Clean the sanding
Clean the sanding residue using a dry cloth or a vacuum.
Step 3
Apply the paste
Apply the paste by putting some of Jazeera Ultimate paste on the putty knife and drag it across the crack until it is completely filled.
Step 4
Wait for 4 hours
Wait for 4 hours for the paste to dry.
Step 5
Level the surface
Level the surface again using sanding paper 220.
Step 6
Clean the Surface
Clean the sanding residue using a dry cloth.
Step 7
Cover the paste
After fixing the problem, you can cover the paste by: Apply one coat of paint primer such as Jazeera Green Prime for interior walls or Royal Prime for exterior walls
